Signal (electrical engineering)Wikipedia open wikipedia design.
The English used in this article or section may not be easy for everybody to understand. (July 2012)
The concept is broad, and hard to define precisely. Definitions specific to subfields are common. For example, in information theory, a signal is a codified message, i.e., the sequence of states in a communications channel that encodes a message. In a communications system, a transmitter encodes a message into a signal, which is carried to a receiver by the communications channel. For example, the words "Mary had a little lamb" might be the message spoken into a telephone. The telephone transmitter converts the sounds into an electrical voltage signal. The signal is transmitted to the receiving telephone by wires; and at the receiver it is reconverted into sounds.
Examples of signals[change | change source]
- Motion. The motion of a particle through some space can be considered to be a signal, or can be represented by a signal. The domain of a motion signal is one-dimensional (time), and the range is generally three-dimensional. Position is thus a 3-vector signal; position and orientation is a 6-vector signal.
- Sound. Since a sound is a vibration of a medium (such as air), a sound signal associates a pressure value to every value of time and three space coordinates. A microphone converts sound pressure at some place to just a function of time, using a voltage signal as an analog of the sound signal.
- Compact discs (CDs). CDs contain discrete bits representing a sound signal, recorded at 44,100 samples per second. Each sample contains data for a left and right channel, which may be considered to be a 2-vector (since CDs are recorded in stereo).
- Noise typically unwanted but not always.
References[change | change source]
Shannon, C. E., 2005 , "A Mathematical Theory of Communication," (corrected reprint), accessed Dec. 15, 2005. Orig. 1948, Bell System Technical Journal, vol. 27, pp. 379–423, 623-656.