Honda NSR150

This article has multiple issues. Please help improve it or discuss these issues on the talk page. (Learn how and when to remove these template messages) The topic of this article may not meet Wikipedia's notability guidelines for products and services. Please help to demonstrate the notability of the topic by citing reliable secondary sources that are independent of the topic and provide significant coverage of it beyond a mere trivial mention. If notability cannot be shown, the article is likely to be merged, redirected, or deleted. Find sources: "Honda NSR150" – news · newspapers · books · scholar · JSTOR (August 2020) (Learn how and when to remove this template message) This article needs additional citations for verification. Please help improve this article by adding citations to reliable sources. Unsourced material may be challenged and removed. Find sources: "Honda NSR150" – news · newspapers · books · scholar · JSTOR (August 2020) (Learn how and when to remove this template message) This article may relate to a different subject or has undue weight on an aspect of the subject. Specifically, the NSR produced in Taiwan by Kymco, without many details on Honda NSR. Please help relocate relevant information and remove irrelevant ones. (August 2020) (Learn how and when to remove this template message)

The Honda NSR150 is a motorcycle produced in Thailand by Honda as Honda NSR and in Taiwan by Kymco under the name Kymco NSR. The early Taiwanese NSR150s were produced with engines imported from Japan. However, later models used engines cast in Taiwan by Kymco.

Due to local regulations, Kymco NSR150 had lower power than the ones made in Thailand because the carburetor was smaller and the ports in the cylinder had slightly different sizes.^[1] It is common to switch to a Thai-made cylinder in NSR racing in Taiwan. Due to a significant amount of warranty claims the CDI was programmed to open and then close the RC valve because running cheap 2 stroke oil reduced the power of the engine further.

The Taiwanese and Southeast Asian NSR150's are quite closely related sharing the same stroke and appearance.

Kymco's spare parts supply for Taiwan NSR's is slowly declining with slowed production and competition from easily available aftermarket parts.

YSS aftermarket rear suspension has been available for Taiwanese NSRs since year 2000.

An interesting fact is that Kymco's 2010 Quannon Naked's 37MM front fork assembly can be nearly directly transplanted on Taiwan made NSRs with the help of a small CNC machined washer, directly addressing the problem with "head float" under hard acceleration and stability at higher speeds.

References[edit]

This motorcycle, scooter or moped-related article is a stub. You can help Wikipedia by expanding it.

• v
• t
• e